Tattoo Armature Bar – 3 Choices – Baltimore Street Irons
Specifications:
- Quantity: 1 armature bar
- 3 choices: lining bar, shading bar, or speed bar
- Size: 1 ½” long, ⅜” wide, 3/16” thick
- 8/32″ threading for mounting hole
- Black oxide treatment
- Manufacturer: Baltimore Street Irons
Description
Baltimore Street Irons Armature Bar – Black Oxide Finish
The Armature Bar, or A-Bar, is the final piece of the drive system that inserts the needle into the skin; where the needle loop attaches to the machine. Baltimore Street Irons gives us three armature bar choices; a lining bar, a shading bar, and a speed bar. All three armature bars are tumbled and have a black oxide treatment. They measure 1 ½” long, ⅜” wide, 3/16” thick, and have a mounting hole drilled and tapped for 8/32” screw. The shader pin measures ¼”, while the liner pin measures ⅜”. Make sure to check out all the Baltimore Street Irons products we carry.
Related products
-
4pc. Front Drilled Brass Binder Set – Baltimore Street Irons
0 out of 5(0)Specifications:
- Quantity: 1 set contains 4 pieces
- Material: brass
- Contains: front binder, rear binder, thumbscrew and contact screw
- Standard or side mount rear binder
- Manufacturer: Baltimore Street Irons
-
Specifications:
- Quantity: 1 bar
- Size: 45mm long, 10mm wide, 5mm thick
- 4mm diameter of threaded part
- 7mm thread length
- Holds needle loop
- Establishes speed of machine
- Manufacturer: Precision
-
Specifications:
- Quantity: 1 screw
- Material: steel
- 13mm length
- 4mm diameter of threaded part
- 7mm thread length
- For springs or armature bar
- Manufacturer: Precision
-
Long Brass Contact Screw – M4 Metric – Version 1
0 out of 5(0)Specifications:
- Quantity: 1 screw
- Size: 32mm total length, 25mm for threaded area length
- Material: brass
- M4 metric
- 7mm thread length
- Manufacturer: Precision
Note :Available in version 2 ,3,4,5,6,7,8,9
-
Brass Spring Flake Adjuster and Spring Bender – Alignment & Regulator Combo For Coil Tattoo Machines
0 out of 5(0)Specifications:
- Quantity: 1 adjuster
- Material: Brass
- Net Weight: 220g
- Dimension: 82.6mm x 30mm x 30mm.(L*W*H)
- Used to align your armature bar with front & back springs
- Follow directions below on bending the spring & aligning springs with armature bar
-
Solid Copper Contact Screw 8/32″ – Baltimore Street Irons
0 out of 5(0)Specifications:
- Quantity: 1 screw
- Size: 1” long
- Material: copper
- 8/32 threading
- Manufacturer: Baltimore Street Irons
Reviews
There are no reviews yet.