Armature Bar for a Tattoo Machine – M4 Metric – Tattoo Machine Supplies
In Stock
Specifications:
- Quantity: 1 bar
- Size: 45mm long, 10mm wide, 5mm thick
- 4mm diameter of threaded part
- 7mm thread length
- Holds needle loop
- Establishes speed of machine
- Manufacturer: Precision
Categories: Armature Bars, Machine Parts and Frames, Tattoo Machines & Parts
Description
M4 Metric Armature Bar for a Tattoo Machine – Tattoo Supplies
The Armature Bar is important piece for every tattoo machine. Its job is to hold the needle loop and establish the speed of the machine. This Armature Bar has 4M Metric threading, is 10mm wide and 5mm thick. The overall length of the Armature Bar is 45mm. The nose portion measures 5mm and is 3.3mm thick. The threaded part has a diameter of 4mm and the thread length, or distance of each thread, is 0.7mm.
Be the first to review “Armature Bar for a Tattoo Machine – M4 Metric – Tattoo Machine Supplies” Cancel reply
Related products
-
Brass Spring Flake Adjuster and Spring Bender – Alignment & Regulator Combo For Coil Tattoo Machines
0 out of 5(0)Specifications:
- Quantity: 1 adjuster
- Material: Brass
- Net Weight: 220g
- Dimension: 82.6mm x 30mm x 30mm.(L*W*H)
- Used to align your armature bar with front & back springs
- Follow directions below on bending the spring & aligning springs with armature bar
-
Long Copper Contact Screw – M4 Metric – Version 1
0 out of 5(0)Specifications:
- Quantity: 1 screw
- Size: 32mm total length, 25mm for threaded area length
- Material: copper plated
- M4 metric
- 7mm thread length
- Manufacturer: Precision
Note :Available in version 2 ,3,4,5,6,7,8,9
-
Specifications:
- Quantity: 1 set up contains 7 pieces
- Brass contact and binding post
- Metric threading
- Build your own
- Manufacturer: Precision
-
Specifications:
- Quantity: 1 adjuster
- Outer block size: 80mm long, 58mm wide
- Use to align armature bar with front and back springs
- Material: Aluminum
- Manufacturer: Precision
-
Snug Fit Rubber Nipples – Bag of 100 – Tattoo Supplies
0 out of 5(0)Specifications:
- Quantity: 1 bag of 100 nipples
- Material: black rubber
- Use to keep needle in place
- Lightweight and easy to use
- Manufacturer: Precision
-
Short Copper Contact Screw – M4 Metric – Version 1
0 out of 5(0)Specifications:
- Quantity: 1 screw
- Size: 27mm total length, 20mm for threaded area length
- Material: copper plated
- M4 metric
- 7mm thread length
- Manufacturer: Precision
Note :Available in version 2 ,3,4,5,6,7,8,9
Reviews
There are no reviews yet.